When it comes to drilling into hard materials, you can use a hammer drill. It's a rotary drill that generates a hammering motion. This type of drill is the best choice for drilling into hard materials such as brick, concrete, and stone. This drill is commonly used in construction and home improvement projects.

It's important to use the proper masonry drill bit to do the job correctly. The drill bit must be designed to work with the density of the brick material you're drilling into. It should also have a stopper to prevent the drill bit from cutting too deep. Make sure that your location is clear of obstacles and wear protective gear before starting. First, use a small masonry drill bit to drill a pilot hole. Once the pilot hole is made, you can use a larger masonry drill bit to drill a larger hole. Be sure to drill the hole perpendicular to the brick wall, or you'll end up with a hole that's too deep.

You can purchase a masonry drill with a carbide-tipped bit from a home center or hardware store. However, if you're looking to drill deep holes into concrete, you may need a heavy-duty drill. It takes longer to drill a hole in masonry, and the drill motor can be overworked.

Another type of masonry drill uses a hammer drill. A hammer drill uses a hammer-like action, which means the drill bit will not be able to penetrate the surface of the stone. When used properly, the masonry drill can be extremely helpful for homeowners and contractors looking for an easy, reliable way to drill through stone materials.

Before drilling into mortar, you should make a pencil mark on the mortar where you want to drill. Then, use a masonry drill with a precision bit and wear safety equipment. Once you have marked the location, hold the tool against the mark, and then increase the trigger pressure gradually to drill. When you reach the desired depth, stop drilling. Some tools come with depth gauges, so you can see where to stop the drill.

Another type of masonry drill is a rotary hammer drill. It can be used for drilling holes into concrete. The main difference between the rotary hammer drill and the regular drill is the quality of the masonry drill bit. It is made of carbide, which is more durable than the ordinary drill bit. Also, make sure that the drill bit and the hole area are wet before drilling. This will reduce friction and minimize the chances of splitting stone.

Masonry drills use drill bits that have special cutting edges and hammer action. They are generally made of softer steel and tungsten carbide. They are commonly used with hammer drills, which hammers the bit into the masonry as it rotates. These bits also have special shanks that allow them to slide inside the chuck.