General provisions
1. Before manual operation, check whether the handle of the axe, hammer and chisel is firm.
2. When operating the machine, do not wear gloves and tie the cuffs.
3. When operating, pay attention to whether there are barbs and nails on the wood to prevent damage to the equipment or the saw blade flying out and hurting people.
4. When stacking wood, it should be flat, stable, and neatly stacked. It is not allowed to be large and small.
5. Smoking is strictly prohibited at the woodworking site, shavings, sawdust, etc. should be cleaned up in time, and there should be reliable firefighting facilities.
6. Each machine should have a special person in charge, and non-personnel should not start it without authorization.
7. Pay attention to the sound and the bearing temperature of the motor during the operation of the machine, and stop the machine in time to deal with the problem.
8. The machine should be checked before driving, and the processing can only be carried out when the test run is normal.
