Safety operation standard and code of conduct for floor woodworking- Ningbo Tiangong Great Star Tools Co.,Ltd.

Safety operation standard and code of conduct for floor woodworking

Posted by Admin | 04 Nov

general provisions

1. Before manual operation, check whether the handle of axe, hammer and chisel is firm.

2. When operating the machine, do not wear gloves and tie the cuffs.

3. During operation, pay attention to whether there are barbs and nails on the wood to prevent damage to the equipment or flying out of the saw blade to hurt people.

4. When stacking wood, it shall be leveled, stably placed and neatly stacked. It is not allowed to go up large or down small.

5. Smoking is strictly prohibited at the woodworking site. Shavings, wood chips, etc. shall be cleaned in time and reliable fire-fighting facilities shall be provided.

6. Each machine shall be in the charge of a specially assigned person and shall not be started without permission by anyone other than the staff.

7. Attention shall be paid to the sound and motor bearing temperature during the operation of the machine, and the machine shall be shut down in time if any problem is found.

8. The machine shall be checked before start-up, and processing can be carried out only when the commissioning operation is normal.